Crosby® Vertical Plate Clamps

The IPU10 vertical lifting clamp is used for lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180º)
as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or multiple leg sling without side-loading the clamp.

The IPU10S vertical lifting clamp is used for lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180º)
as needed. This clamp is specifically designed for use on stainless steel material.

• Available in capacities of .5 thru 30 metric ton (Higher Working Load Limits are available upon request.)
• Wide variety of jaw openings available: 0 to 155mm
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required
• Individually Proof Tested to 2 times the Working Load Limit with certification
• Company name Crosby (IP), logo, Maximum & Minimum Working Load Limit and jaw opening permanently stamped on body
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance
and warranty logbook
• Available in variety of styles:
• IPU – Standard clamp for materials with a surface harness to 37Rc (345HB)
• IPU10J – Larger jaw opening
• IPU10S – For use on stainless steel material
• IPU10H – For use with materials with a surface hardness to 47Rc (450HB)
• Full 180º turning range for material transfer, turning or moving
• Lock open, lock closed ability with latch for pretension on material and then release connection between the clamp and hoist hook
• Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook
• Minimum WLL of 10% of Maximum WLL
• Maintenance replacement kits are available
• Manufactured by a ISO 9901 facility
• All sizes are RFID EQUIPPED